The final of the Chinese-Russian Industrial Innovation Competition 2023 was held in Guangzhou, China.
June 25 - 27, 2023
On June 25-27, 2023, the final of the Sino-Russian Industrial Innovation Competition 2023, organized by the Center for International Technical and Economic Cooperation under the Ministry of Industry and Informatization of the People's Republic of China, was held in the city of Gungjou (Guangzhou), China. In the Final of the competition. 28 teams from China and Russia presented their technological projects and developments in the final. They were evaluated by a jury that included entrepreneurs and scientists from both countries.

The FIDESYS CAE technology business project takes the honorable second place.
We congratulate all the winners and participants of the final, we are proud of our honorary second prize and we have big plans ahead!

New version of CAE Fidesys 6.0


Additions and improvements to the functionality

  • Increased calculations performance and reduced memory consumption
  • Added the ability to disable the method of consistent results
  • Added support for 2D axisymmetric problems (for linear statics, alpha version)
  • Added support for setting nonmonotonic and asymmetric (for compression and tension) hardening curve
  • Improved operation of constraints by degrees of freedom with a given stiffness
  • Added consideration of pressure as follower load in stability analysis and modal analysis with preload
  • Added external CFD integration for FlowVision (alpha version)

Additions and improvements to the postprocessor

  • Added ability to Enable/Disable contacts and сoupling during download steps in the GUI panel

The user Manual version 6.0 can be downloaded here.

 Online marathon "Engineering Systems 2023"
May 25, 2023
On May 25, the final webinar of our online marathon "Engineering Systems 2023" took place. Just like the previous one, it was devoted to the joint solution of problems of hydrodynamics and strength.

Fidesys is another popular Russian strength package that has integration with FlowVision to solve interdisciplinary problems of interaction between deformable bodies and liquids. At the webinar, we will talk about the capabilities of the Fidesys package for solving strength problems. And in the course of a live demonstration, we will show how a calculation project is created and joint modeling is performed in the FlowVision and Fidesys packages.

The recording of the webinar can be viewed at the link: FROM-2023 Webinar 7. Strength and hydrodynamics in FlowVision and Fidesys.

Working moments of the online marathon.

57 Interregional seminar "Information technologies of design of construction objects: the course on technological sovereignty"
April 17 - 21, 2023
Fidesis Company took part in the 57th Interregional Seminar "Information Technologies for the design of construction facilities: the course on technological sovereignty", organized by the ASPO company. At the event, Anatoly Vershinin, Professor at Moscow State University and Technical Director of Fidesis, spoke about the capabilities of the Fidesys CAE engineering analysis system and its application in the construction industry. As a result, preliminary agreements were reached on cooperation with the ASPO and the KNC of the Russian Academy of Sciences within the framework of the RFRIT grant.

A new version of CAE Fidesys 5.2 is available


Additions and improvements to the functionality

  • Added linear isotropic hardening type 1 for the Drucker - Prager model
  • Added the ability to set the temperature in tabular form depending on x, y, z, t
  • Improved protection operation
  • Added the ability to set contacts, connections and periodic conditions on the steps
  • Added the ability to set internal pressure in girder elements with an annular section
  • Added acceleration output to SEG-Y files
  • In the calculation of bolted connections, the operation of the power preload has been improved
  • Added the ability to select the entity "Nodes at a distance" for boundary conditions of Communication
  • Added the ability to set the temperature dependence in the properties of multilinear hardening

Additions and improvements to the postprocessor

  • Added a new filter "Stress/Strain Linearization"
  • Added a filter "Coordinate systems" for viewing VAT in laminate shells
  • Added a new filter "The theory of the strength of Cod - Saint-Venant"
  • Added the possibility of parallelization of filters, which speeds up data processing

The user Manual version 5.2 can be downloaded here.

A new version of CAE Fidesys 5.1 is available


Additions and improvements to the functionality

  • Added common friction contact for FEM and ITU
  • The supported order for the spectral element method is 9
  • Added step-by-step loading with a change in the topology (composition of blocks) of the body, taking into account the final deformations
  • An elastic-plastic calculation has been added for the Drucker-Prager model with tabular (multilinear isotropic) asymmetric hardening in small deformations
  • Added calculation of poroelastic effective properties
  • Added integration with BricsCAD and nanoCAD packages
  • Added linear isotropic hardening type 1 for the Mises plasticity model
  • Added calculation of thermal conductivity for orthotropic multilayer shells
  • Added calculation for orthotropic thermoelasticity
  • Added the ability for material properties to set temperature dependence
  • Added the ability to calculate random vibration
  • Added the setting of cylindrical and spherical coordinate systems
  • For modal analysis, the possibility of calculations for materials with zero density has been added
  • Fixed the output of the results in the 3D form of beams for high orders of ITU
  • Improved and expanded converter for *.cdb format files

Additions and improvements to the preprocessor

  • Changed the interface for calculating Additive printing
  • Added display of local coordinate systems for beam and shell elements

Postprocessor additions and improvements

  • For Linear spectral analysis, residual response accounting has been added
  • The “Harmonic Analysis” filter has been improved: interactive node selection has been implemented, reaction calculation has been added
  • Added a new “Multi-threshold” filter
  • Expanded the functionality of the “Coordinate System” filter
  • Improved the “Margin of Safety” filter
  • Time or harmonic index output has been added to the model display area.

The user Manual version 5.1 can be downloaded here.

Fidesys company will take part in the Forum "Engineers of the Future 2019"


As part of the work of the Faculty of Engineering and Technology at the forum "Engineers of the Future 2019", Fidesis will present its software package for strength engineering analysis CAE Fidesys, successfully used in various industries in Russia and abroad. The VIII International Youth Forum "Engineers of the Future" will be held in the Orenburg region on the basis of the regional health center for children and youth "Yantar" from July 2 to 13. You can register for the forum as a participant on the website . The official organizers and co-organizers of the event: the Union of Machine Builders of Russia, the Government of the Orenburg Region, Rostec Group of Companies, the Federal Agency for Youth Affairs, the Association "League of Assistance to Defense Enterprises". For eight years, the event was attended by about 14,000 young professionals, scientists, postgraduates and students. Its participants were young engineers from 400 industrial companies and 85 universities from 60 regions of the Russian Federation. The age of the forum participants is 20-35 years.

Fidesys company took part in the Forum "Engineers of the Future" 2018


From July 10 to July 19 , 2018 in The Forum "Engineers of the Future" was held in the Ulyanovsk region. This year, the Forum brought together more than 1,500 young engineers, graduate students and students from more than 300 enterprises and universities who gathered in Ulyanovsk region from 70 regions of Russia and 43 countries of the Near and Far Abroad — from Kazakhstan to Germany, from Egypt to Bolivia, from Italy to South Korea. The educational program of the Forum was presented by nine specialized faculties — nine key areas of the engineering industries of Russia, at which more than 200 speakers — representatives of 60 largest Russian corporations - spoke — PJSC "United Aircraft Corporation", JSC "United Shipbuilding Corporation", JSC "United Engine Corporation", State Corporation "ROSCOSMOS", JSC "Russian Helicopters", PJSC "Sukhoi", PJSC "Kamaz", PJSC "Avtovaz", JSC "Ramenskoye Instrument Design Bureau" and a number of technical universities, as well as representatives of foreign countries.

Fidesys, a permanent partner of the Forum's educational program, once again conducted training on the use of modern SAE packages in design. 23 specialists have been trained to obtain a certificate. They emphasized the importance and usefulness of owning and using SAE packages for both specialists of strength departments and designers. The importance of using domestic software products of medium and heavy class, such as CAE Fidesys, capable of solving complex tasks, such as calculating assemblies (including working with gaps), calculating without rearranging grids and dynamics on a spectral element, was also noted.

Hardware and software complex for solving industry tasks in CAE Fidesys


A high-performance Russian computing cluster based on liquid cooling IMMERS has been tested for compatibility with domestic CAE Fidesys.

The founder of the company is an honored scientist


Fidesys Engineering Company congratulates Vladimir Anatolyevich Levin, founder and Scientific director of the Fidesys and SimForDesign SAE (Simulation Streamed For Design) projects, Honorary Worker of Higher Professional Education of the Russian Federation, Professor, Doctor of Physical and Mathematical Sciences, Professor of the Department of Computational Mechanics of the Faculty of Mechanics and Mathematics of Lomonosov Moscow State University with the honorary title "HONORED SCIENTIST OF THE RUSSIAN FEDERATION" (Decree of the President of the Russian Federation No. 416 of September 10, 2017).

Fidesis Company took part in the Working Group of NTI TechNet within

the framework of the "V International Forum of Technological Development"


One of the main directions of the implementation of the National Technological Initiative within the framework of the activities of the TechNet working group is the development of advanced production technologies. Thanks to their integration and application within the Factories of the Future (digital, "smart", virtual), it is possible to design and manufacture globally competitive products of a new generation in the shortest possible time.

What engineering and technological tasks and challenges that require solutions are relevant for companies of high-tech industries in the regions?

What competencies and technologies are in demand by industry to create Factories of the Future?

How to integrate the implementation mechanisms of the TechNet roadmap into regional programs for the development of the manufacturing sector?

What are the prospects for creating a regional—branch network of operating Factories of the Future?

Winner of the Cyber Hydraulic Fracturing competition


Fidesis Company, as part of the Skoltech consortium and MIPT, became the winner of the Cyber Hydraulic Fracturing competition for the development of a software product for modeling hydraulic fracturing.

A new version of CAE Fidesys 1.7 is available


The distribution kit of the new version of CAE Fidesys 1.7.0 is available for download. It has new types of analysis, boundary conditions, new types of elements and profiles of beam sections. The operation of the generator of unstructured computational grids has been improved, the capabilities have been expanded and support for CATIA formats has been added.